Restore glass console

If you purchased this glass console in doubt appreciate the beauty of glass to take home in any room of your home. You probably also recognize that over time, glass console your look not as nice as it once was.

Key to the glass console looks better after starting.

Prevent damage

We all know that glass is fragile. But not always treat it as if there is one of theMobile. It seems that we think there was a device, it can be rough with him. This is a recipe for broken glass console.

Instead, take steps to put your tables to be cracked. It starts with coasters for cups, which can be set. glass or porcelain hard against the glass console is not healthy for the tables.

Next to look at other things you have views on these tables glass console. If youLamps or other decorative elements, make sure to put something underneath them to prevent them from scratching or touching the glass surface.

Keep it clean

Next, you need to get your console tables glass clean. This is done simply enough. Just take a little 'mix of mild detergent and warm water. Use a clean cloth on the table surface with this solution, then wipe off.

If the tables are dirty, in exceptional cases, you can addsomething more to the solution. Consider a few drops of ammonia to clean and really shine.

Polishing

Not everyone knows that polishing glass tables. One might think that since they are glass, they just glow all their own. During it, you can also help this along a bit '. Use a soft cloth to polish the surface of the glass console really shine. Be sure to use the cloth you go is clean, becausenothing on the cloth strip or scratch the table.

Attach Breaks

It is not uncommon for the console will have a melted glass chip. I just wanted to make everyday use a hand and a bit 'of what it was like a cup on the table is enough to chip an edge or corner of your tables. The good news is that there is a simple way to solve this problem.

Keep the chipped piece of glass. You will see him back on the table. Then you need to get some clear epoxy. Thisis usually in a tube containing two ingredients that you mix together to create a strong goo should be created. After the epoxy mix, use it to put the chip back in place. You should then develop a way to band together the pieces until the epoxy dries.